Skip to content

Supported devices

SoundBase Desktop talks to wireless systems from several manufacturers: it can set frequencies and names, show live meters on the Monitoring page, and — on some hardware — run a live scan on the plot.

  • Control — set frequency, channel names, and device parameters from SoundBase
  • Monitoring — live meters and telemetry on the Monitoring page and Remote View
  • Scanning — use the device’s receiver or antennas as a spectrum scanner
Series Model Control Monitoring Scanning
Spectera Base Station ✓ ✓ ✓
Digital 6000 EM 6000 ✓ ✓ ✓
EW-DX EW-DX EM 4 Dante ✓ ✓ ✓
EW-DX EM 2 ✓ ✓ ✓
EW-DX EM 2 Dante ✓ ✓ ✓
ew G4 EM 300-500 G4 ✓ ✓
SR IEM G4 ✓ ✓
ew G3 EM 300 G3 ✓ ✓
EM 500 G3 ✓ ✓
SR 300 IEM G3 ✓ ✓
2000 EM 2000 ✓ ✓
EM 2050 ✓ ✓
SR 2000 IEM ✓ ✓
SR 2050 IEM ✓ ✓
Charger L6000 ✓
CHG70N ✓

Spectera scanning uses the Base Station’s antenna ports — each connected antenna can feed a live scan trace on the plot.

Series Model Control Monitoring Scanning
Axient Digital AD4Q ✓ ✓
AD4D ✓ ✓
ULX-D ULXD4Q ✓ ✓
ULXD4D ✓ ✓
ULXD ✓ ✓
PSM1000 P10T ✓ ✓
UHF-R UR4D+ ✓ ✓
Series Model Control Monitoring Scanning
Astral ARX16 ✓ ✓
ARX32 ✓ ✓
Series Model Control Monitoring Scanning
Symphony MRK16 ✓ ✓ ✓
MCR54 ✓ ✓
Transmitter MTK982 ✓ ✓
MTK952 ✓ ✓
Matrix Combiner MAT244 ✓ ✓
MAT288 ✓ ✓
Series Model Control Monitoring Scanning
Receiver DSQD ✓ ✓
Series Model Control Monitoring Scanning
N-Series N-DR1 ✓ ✓ ✓
N-DR1-AO ✓ ✓ ✓

Beyond the receivers above, the plot’s live scan also works with dedicated spectrum analyzers — RF Venue Spectrum Recorder, tinySA Ultra, and Owon HSA1016. See Connecting a live scan device.